防静电屏蔽袋由APET+PP/PE复合而成，内外层采用静电耗散材料，中间夹层喷镀金属，有防静电、屏蔽的功能；无毒、环保、可再生。
The anti-static shielded bags are compounded by A PET and CPP /CPE as their materials. Inner and outer layer of static dissipative materials, The interlayer spraying metal film, With anti-static shielding function; non-toxic, environmentally friendly, renewable.
技术性能指标(Technical Index):
1、外观为银灰色、半透明、无折皱、无破损、无严重皱纹。
appearance: gray silvery, translucence, non-cockle, unbroken, flat;
2、平均厚度：73±4.5μm。 average thickness: 73±4.5 µm.
3、平均每平方米重量：73±4.5g/m2。average weight per sp.m.:73±4.5G/M²
4、尺寸偏差：≦2%。 dimension tolerance: ≤2%
5、封边偏差：≦2mm。edge tolerance: ≤2MM
6、端面偏差：≦2.5mm。end surface tolerance: ≤2.5MM
7、表面电阻：≦1011Ω/cm2，通常为108-10Ω/cm2（相对湿度≧50%条件下）
surface resistance: ≤10 11Ω/CM2, normal 10 8-10Ω/CM2 (under the condition of comparative humidity no less than 50%)
8、静电屏蔽电压：≦30V（外加测试静电电压为100V）
anti-static shielded voltage:≤30V (add testing static voltage 100V)
9、电磁干扰衰减﹥100DB。electromagnetism disturb attenuation: >100DB
10、静电泄放时间﹤0.03S。static release time: <0.03S
11、热封强度≦20N/15mm。heat seal intension: ≤20N/15MM
12、拉伸强度5800PSI。extended intension:5800PSI
特点(Characteristics):
屏蔽袋的材质结构APET/CPP（半镀铝膜/聚丙烯流延薄膜）透明度好，手感硬，撕力比较弱与APET/CPE(半镀铝膜/聚乙烯薄膜)热封性好，撕裂度好，拉力强，手感比较软两种，整体颜色为银灰色半透明，内置物可见。
There are two kinds of shielding wrapper materials, one, its structure is APET/CPP, it is transparency, relatively hard, and its tear strength is relatively weak. The other one, its structure is APET/CPE, its seal is good, its seal is good, it has good tear and high tensile strength, and it feels soft. The overall color is silver-gray transparent, and the built-in objects is visible.
屏蔽袋独特的结构可形成感应罩效应保护袋内物品与静电场隔离，防止静电积累，免受静电危害，是防静电包装袋之首选。
The unique structure of shielding wrapper form a induction hood to effectively protect the goods inside the static field, from static hazards, and prevent accumulation of static electricity, is the first choice of Anti-static wrapper.
用途及应用领域（Use and applications）:
用于有防静电要求的电子产品包装，如各类PC板、IC集成电路、光驱、硬盘、电子元器件等。
The recommended use range of the shielding wrapper: electronic products packaging that has requirements for antistatic, such as various types of PC boards, IC integrated circuits, optical drives, hard drives and electronic components.
